If you've done it, please tell your story so other fish owners can benefit from your ingenuity.
Intake Cover
I cut up a lizard ladder from Petco, because standard netting is too flimsy and difficult to secure. Then I folded a square of the material over the intake and secured it with silver wire that won't …
More
Multi-Betta Aquarium
I took a 29-gallon aquarium and split it up in 5 partitions using some readily available plastic dividers and a bit of silicone to hold each divider in place. Each partition is planted with a large A…
More
DYI Siphon
Instead of doing the siphon method, I went to the boat store (or go on-line), bought a small water pump, put in a filter. Adjust the pump to not siphon to fast/hard, either by using a smaller battery…
More
Built a Better Fish Trap
I used a 2 liter bottle. Cut the top off right where it starts to bend. Invert into the bottle. Add a little food inside. Fish can swim in but can't get out. Be sure to cut a little hole at the bott…
More
Modified Gravel Siphon
I found a rubber siphon bulb in the auto parts section of my local store. It had the same size plastic tubing as my gravel cleaner. I just pulled the tubing off the fat end of the gravel cleaner and …
More
